Vapor Block™ Fuel Line Sleeve - 0.375" (10mm) I.D. x 36"

Vapor Block™ solves the problem of fuel and other fluids boiling from extreme heat and causing a vapor lock situation.

Prevent rough idling and difficult starting caused by vapor lock with DEI Vapor Block™. Vapor Block™ fuel line sleeve was specifically developed to prevent vapor lock in fuel systems by greatly reducing heat in the line to keep fuel cooler and below boiling. Vapor Block™ installs easily with a split design and adhesive flap. There is no need to disconnect the fuel line to install. Simply wrap Vapor Block™ around the line, remove the adhesive liner and press the adhesive flap into place.

Made of glass fiber and polyester laminated to an aluminum outer layer, Vapor Block™ offers excellent long lasting thermal protection without paying for expensive repairs or modifications.

• 3/8" (10mm) inside diameter x 36"
• Split design with adhesive flap
• Use on fuel lines to prevent vapor lock
• Can be used on any cable, hose or line for added heat protection
• Easy to cut to size

Note: Items with custom cut patterns and/or custom cut lengths of material cannot be returned.

*DO NOT apply directly to exhaust components.

Length:

36 inch

ID:

10 mm

ID:

3/8 inch