Fire Sleeve™ & Tape Kit - 0.625" ID x 36"
(010472 )
|
One 36 inch length of Fire Sleeve with a 5/8 inch inside diameter and one 1 inch by 2 foot roll of silicone tape.
$33.99
(No reviews yet)
Write a Review
Fire Sleeve™ & Tape Kit - 0.625" ID x 36"
Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution.
Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500°F.
Includes a 16-inch length of black Fire Tape, an adhesive-free, self-adhering tape, to finish off ends of Fire Sleeve or when joining two Fire Sleeves together while presenting a clean and professional look.
- Insulates wiring, hoses, oil / brakes / transmission lines & more
- Use for bundling & protecting hoses, electrical wiring, etc.
- Withstands 2000°F of intermittent heat
- Includes 16 inches of black Fire Tape
- Size: 0.625 (5/8) inch x 36 inches
Fitment Chart
AN Conversion Chart
AN Size
Metal Tube O.D.
Thread Size
2
1/8"
5/16 24 SAE
3
3/16"
3/8 24 SAE
4
1/4"
7/16 20 SAE
5
5/16"
3/8 18 SAE
6
3/8"
9/16 18 SAE
8
1/2"
3/4 16 SAE
10
5/8"
7/8 14 SAE
12
3/4"
1-1/16 12 SAE
16
1"
1-5/16 12 SAE
20
1-1/4"
1-5/8 12 SAE
24
1-1/2"
1-7/8 12 SAE
28
1-3/4"
2-1/4 12 SAE
32
2"
2-1/2 12 SAE
Fire Sleeve Application Chart
Part#
Name
Line Size*
10470
3/8" Fire Sleeve
3AN
4AN
6AN**
4AN
6AN**
10472
5/8" Fire Sleeve
6AN
8AN
8AN
10474
1" Fire Sleeve
10AN
12AN
16AN**
5/8" Heater Hose
3/4" Heater Hose
12AN
16AN**
5/8" Heater Hose
3/4" Heater Hose
*Braided Kevlar line was used in testing. You may notice a slight difference in size if you have Braided Stainless Steel lines.
**Tight fit: If you have fittings on your line, you may need to order one size up. You can achieve between 1/16" and 1/8" stretch out of our material. This may help on installs with fittings already on the lines.
- ID:
- 16 mm
