DEI News and Press Releases


Thank you for taking the time to visit our News Press Room where you can find the latest information on DEI's products.
If you are a member of the press and need additional information please contact us directly at 1-800-264-9472.

View All | Media Kits | Boom Mat | CryO2 | Design Engineering | NyTrex | Radiator Relief | SPA Turbo USA

DEI Mini Versa Starter ShieldAVON LAKE, OHIO (MAY 4, 2016) – Constructed of an aluminized heat reflective material backed with a high temperature rated glass fiber insulation barrier, the new mini DEI Versa Shield™ protects starters and other components from failure due to heat soak. Capable of reflecting radiant heat up to 2000°F and direct heat up to 500°F, this innovative thermal product installs easily and can be trimmed to size.

Its convenient hook and loop closure design allows the shield to wrap around the starter and attach in minutes. Most starters will not require removal. Simply wrap the starter with the aluminized side out, trim length to fit and secure the edges by pressing the black loop material sewn into the material into the sewn in strip of black hook material.

 


 

DEIs New Exhaust Wrap KitAVON LAKE, OHIO (APRIL 13, 2016) – Don’t let excessive exhaust heat become a power drain. Top engine builders and racers trust DEI thermal wrap to expedite exhaust flow for higher velocity and maximum HP by controlling heat to produce increased exhaust flow and a cooler intake charge.

DEI’s Exhaust Wrap Kit provides everything you need to completely wrap a set of small block or V-6 headers in one package. The kit includes two rolls of 2 inch by 50 ft. wrap designed to protect up to 1500° F, one can of HT Silicone Coating that coats, protects and preserves the wrap after installation, and eight 8 inch and four 14 inch 304 Stainless Steel Locking Ties to ensure long-lasting durability and hold. A free Locking Tie Tool is included to lock the ties tight and works with any ¼” drive. DEI’s stitched-in wrap guide line protects against overlapping for a professional and tight fit.

 


 

DEI C7 Corvette Heat ShroudAVON LAKE, OHIO (MARCH 29, 2016) – DEI’s C7 Corvette Heat Shroud™ is made with a high-temp glass fiber fabric bonded to aluminized material that reflects 90% of radiant heat. The Z06 Corvette is noted for its oil cooler lines placed in close proximity to the catalytic converter capable of reaching 1200+ degrees Fahrenheit.  Radiant heat from the converter can raise the oil temperature to the point of putting the C7 in limp mode and putting other components at risk of failure. This scenario is especially possible at the racetrack or even spirited street driving.

DEI now offers a simple, easy to install solution. The C7 Heat Shroud protects engine oil from overheating without the need to disconnect the oil cooler lines. Developed with a convenient hook and loop closure design, installation takes only minutes.  Simply wrap the heat shroud around the oil cooler line and seal.

 


 

Boom Mat Speaker Performance KitAVON LAKE, OHIO (MARCH 16, 2016) – If it is all about that bass, then Boom Mat’s new Vibration Damping & Speaker Performance Kit is the easiest way to eliminate rattles in the bass and midrange frequencies. Boom Mat, the leading supplier of thermal and acoustic control products for the automotive aftermarket, now offers a new peel and stick damping material designed to improve interior and stereo sound quality.  Boom Mat vibration damping material is recommended for use around speaker mounting surfaces, doors, trunk lids or even license plates to enjoy a quieter, more comfortable vehicle interior.

Developed with an industry-leading 2mm thick, asphalt-free, pure-butyl noise constraining layer backed with a 4mil aluminum panel stiffening top skin, this Made in the USA vibration damping material can be easily installed in cars, trucks, vans, street rods, commercial vehicles to name a few applications. It’s also suggested for a higher performing replacement for OEM body panel materials used in body shops.

 


 

DEI C7 Corvette Catalytic Converter Heat ShieldAVON LAKE, OHIO (MARCH 9, 2016) – The new C7 Corvette has one design flaw that can easily send it into limp mode with reduced power. Because the engine cooler and oil filter are located in close proximity to the driver side catalytic converter, the engine oil can overheat signaling the ECM to reduce power.

DEI now offers a new thermal control solution with the introduction of the C7 Catalytic Converter Heat Shield. Custom designed to prevent oil temperature from rising in the C7 by blocking heat transfer at the source, this shield is a quick, easy and cost effective solution to prevent a loss of power.